07 868 2565
Overhead Gantry Crane Operator Unit Standard 3800
Course Aim
All persons operating or working with a crane must hold the following applicable Unit Standards as a minimum qualification and preferably hold the relevant New Zealand Certificate in Crane Operation.
The minimum requirement for operating a pendant or remote-control traveling crane is unit standard 3800.
Course Overview
Theory and practical assessments covering the following:
- Demonstrate knowledge of company procedures and requirements for lifting practices and overhead cranes
- Demonstrate knowledge of pendant and remote-controlled cranes, monorail, and suspended hoists and lifting equipment
- Demonstrate knowledge of the care and safe use of pendant and remote-controlled cranes, monorail, and suspended hoists and lifting equipment
- Sling, lift, travel, and unload or place regular loads
- Park crane and store equipment
Prerequisites
- Unit Standard 30072 knowledge of slinging regular loads safely
- If trainees do not hold 30072 do not panic, we can deliver this unit for you also
- Evidence of 6 months experience in an environment where cranes are operating
NZQA Unit Standard
3800: Operate a radio remote or pendant controlled overhead crane and lift and place regular loads - Level 3, Credits 10
Attendance Numbers: Minimum 4 - maximum 8 per session (up to 2 sessions per day for refreshers)
Course Duration: Approx. 8 hours for beginner operator - Approx. 5 hours for refresher
(course pre-reading required)
Course Location: TBC
Course Costs: Option 1: $550.00+gst per person (30072 only)
Option 2: $460.00+gst per person (3800 only) Use of your equipment
Option 3: $900.00+gst per person (30072,3800 combo) if booked on consecutive days
Mileage: $120.00+gst to Auckland, Hamilton & Tauranga and $1+gst per km everywhere else
(Minimum number charges will be applied if minimum numbers are not met)
For more information, please refer to the trainee handbook or the student information section of our website.